Are you in dire need of the comprehensive list of the best shower mold cleaners that are non toxic? Then this article is for you.
The presence of mold is a typical issue in buildings, especially in damp, stuffy rooms with poor ventilation. In the case of mold, the bathroom is often a problem area. It can be challenging to eradicate once it has spread.
Additionally, it can cause serious problems, so it is essential to take precautions to avoid its spread. For this reason, it requires immediate and proper attention.
Most people think using toxic cleaners like bleach is the only option if you’re trying to eliminate mold in your shower. Contrary to popular belief, however, doing so is what you should not do.
This article will explain why it’s best to avoid using toxic cleaning solutions and suggest some shower mold cleaners that are non-toxic.
Why You Should Avoid Toxic Cleaning Solutions To Get Rid Of Mold
Toxic cleaners are often the first thing people think of when they see mold. Considering that these cleaners are effective against a wide variety of organisms, it is a no-brainer that it is the best option for eliminating mold. Sorry to say that’s not the case, as toxic chemicals are used in several of these goods.
Some of the chemicals used in their production are poisonous if consumed and potentially fatal if inhaled. The skin and eyes aren’t the only things they can harm. Bleach, like mold, can create a wide range of unpleasant side effects, but it also has risks.
Some of these hazardous substances may be dangerous to the ecosystem. Users, their families, and their pets may be at risk from these dangerous substances.
Groundwater contamination can occur when these goods are disposed of via drains or sewers. The use of non-toxic, all-natural mold removers is sometimes the best option.
How To Clean Mold In Your Shower Naturally
To remove mold safely, here are some suggestions for cleaning it with non-toxic cleaners:
In addition to cleaning, deodorizing, and disinfecting, white vinegar is a gently acidic substance. Also, it is effective against black mold and 82% of mold species on both porous and non-porous surfaces. It is safe on most surfaces and quickly loses its unpleasant odour.
Vinegar is very safe to work with, but it’s still best to wear protective gear like gloves, a mask, and eyewear if you’re cleaning up mold. When dealing with mold, undiluted vinegar is usually the most effective and it is one of the reasons it is rated as one of the best shower mold cleaners.
Get a spray bottle and fill it with white vinegar. Don’t touch the moldy area for at least an hour after spraying the vinegar. The last step is to use a damp cloth to remove any remaining debris and dry the area thoroughly. Within a few hours, the vinegar smell should dissipate.
2. Hydrogen Peroxide
You can effectively treat mold with this common antifungal, antiviral, and antibacterial medication. It is safe for use on various surfaces, including kitchen and bathroom appliances and fixtures, tubs, tile floors, and even wall surfaces.
Hydrogen peroxide causes a fizzing sound when it comes into contact with germs. The hydrogen peroxide’s fizzing indicates that it’s doing its job of reducing mold growth.
Pour the hydrogen peroxide at a 3% concentration into a glass spray bottle to saturate the moldy region thoroughly. After letting the solution soak for ten minutes, scrape away the mold and its spots using a brush.
3. Baking Soda
Baking soda has several purposes around the house, like removing black mold, absorbing aromas in the refrigerator, and soothing heartburn. As a bonus, it also prevents future mold growth by soaking up any excess moisture in the air.
When used, baking soda is most effective when it is new. You can use a pinch of baking soda and a drop of vinegar to verify this. There should be results against the mold if the solution bubbles forcefully. Whether you use it with vinegar or not, baking soda will do an excellent job removing mold.
You can make your baking soda spray by filling an 8-ounce glass spray bottle with water and adding a quarter tablespoon of baking soda. Apply it with a spray bottle and scrub the mold with a scrub brush. Clear the area by rinsing it with water.
Finally, spray the area with the solution and wait for it to dry. It will help eliminate any lingering mold and help keep it from coming back.
When it comes to eliminating stubborn mold, nothing beats a mixture of two parts baking soda, one part white vinegar, and one part water. Turn the mixture into a thick paste by stirring it. Make a thick layer of your mix and spread it across the surface. To get rid of the black mold and stains, scrub them away and wash them with water.
4. Borax Powder
Although it is a naturally occurring mineral, borax can also be employed as a pesticide. It’s one of the most effective methods of ant control. Though it doesn’t give off deadly chemicals or severe vapors like some items, ingesting it can be dangerous.
Mop the floor with a solution made of one cup of borax powder and one cup of water. Scrub a small area of black mold with the disinfecting solution. Use old rags to wipe away the mold and disinfectant fluid and scum, but don’t rinse the area.
When dealing with black mold, leaving behind a bit of borax can help keep it from returning. Keep going until all the black mold is gone. It’s best to leave the area open so that air can circulate and natural light can reach your desk.
This method will speed up the drying process and remove any spores from the air. That will further lessen the likelihood of black mold returning.
5. Essential Oils
Essential oils have helped popularize aromatherapy, but these chemicals have many other uses. Tea tree oil is one of the safest ways to get rid of black mold and it appears on the list of best shower mold cleaners for a reason.
It also serves as an insect repellent, antiseptic, and deodorizer. As a natural fungicide, tea tree oil removes mold and prevents regrowth.
Essential tea tree oil has been used for centuries for its antimicrobial and antifungal effects.
Make sure the tea tree essential oil you buy contains Melaleuca alternifolia if you want to use it to kill mold.
You can make a natural mold cleaner by combining two teaspoons of tea tree oil with 4 cups of water or 4 cups of distilled white vinegar. A strong vinegar or tea tree oil smell may linger for hours, so be forewarned.
Spray the affected region immediately with the solution after measuring and mixing it in a spray bottle. Doing so will allow the solution to permeate the mold’s porous components. Afterward, you can clean or scrub the area when it has been set for at least an hour.
Removing the mold stain from some more stubborn spots may take extra effort. Surface cleaners are sometimes necessary for thorough stain removal. Some people find that essential oils might cause skin irritation, so it’s important to take precautions.
Nothing beats the power of lemon when it comes to cleaning, disinfecting, sanitizing, bleaching, and removing stains. In addition to disinfecting the surface, the high acid content in lemons makes mold easy to remove.
For it to effectively remove mold, it needs to be applied at full power. You can also use scrubbing sponges or spray bottles to apply it. Mold is tough to clean in the shower, kitchen, and other wet areas of the house, but lemon juice can assist with that.
Its natural, pleasant smell is one of the reasons for its widespread use. If mold is to be treated with lemon juice, the first step in the cleaning process should be with some soap and water. After cleaning, rub some fresh lemon juice onto it. Brush or sponge the area right away.
As with any cleaning, it’s best to keep at it until you get the desired outcome. The other option to treat it is to squeeze the juice of three to five lemons into a cup and then pour the solution over the affected region. Give it five minutes, then wipe the surface with a wet cloth.
7. Grapefruit Seed Extract
Essential oils and antioxidants can both be found in abundance in grapefruit seed extract. Like tea tree oil, but without the overpowering aroma, it has been proven effective in eradicating 60 different species of bacteria and yeasts, making it a non-toxic cleaning option. Plus, it eliminates odors.
Although you can use it on porous surfaces, non-porous ones are where its effectiveness shines. Combine ten drops of grapefruit seed extract with one cup of water and transfer to a spray bottle to eliminate mold growth. The mold should be sprayed with the solution and allowed to dry for about 15 minutes.
It may be required to use a brush to remove the mold and then repeat the process. You can remove any stains by wiping, but you should let the liquid remains dry. The mold will continue to be affected, and the likelihood of its recurrence will decrease.
8. Detergent and Water
Clean the mold off non-porous surfaces like glass and tiles with a solution of detergent and water. Cleaning surfaces with detergent is not intended to kill mold but to remove it. When mold develops on a non-porous surface, it is sufficient to remove the mold from the surface.
There should be a small foam in the mixture. The detergent should eliminate both the mold and mildew and the stains as it works to remove them. Use lemon juice to saturate any lingering stains. After you clean the shower, some faint stains may persist. These need to be drenched in lemon juice.
9. Citric Acid
Citrus seed extract, in contrast to vinegar and tea tree oil, does not have a strong smell. Use a spray bottle and dilute around 20 drops of extract in 2 cups of water before applying it to the mold. Keep using the solution until it’s gone.
Using citric acid to remove stains requires multiple rinses because it is not as effective as other treatments but is much safer for use around young children. Using citric acid, you may clean your shower without harming the environment.
10. Castille Soap
One of the most multipurpose natural cleaning agents is castile soap. Castile soap has multiple uses, including cleaning, personal care (hair and body), and laundry care.
Using this soap for cleaning is a fantastic method to cut costs. When first transitioning to non-toxic cleaning, castile soap is also a great product to have on hand. You can add various cleaning solutions to other non-hazardous components. You can also use it with kids and pets without worry.
How about the ingredients in castile soap? Oil extracted from plants and vegetables like coconut, hemp, jojoba, and olive are used in liquid and bar forms. If you want to make a disinfectant spray, mix castile soap with water and a few drops of essential oil like tea tree or eucalyptus.
After letting the solution sit for a few minutes, spray it over the shower surfaces and then rinse and wipe them clean. Paste made from castile soap and baking soda can scrub stains that just won’t come out. Water spots and soap scum will dissolve.
11. Distilled Water
Humidifiers that have developed a musty odor, a crusty buildup, or visible mold are unhealthy and painful to clean. Using distilled water is the most effective technique to prevent the growth of mold and crust.
Water purified by a Pure Water distiller is 99.9 percent free of impurities. During cold and flu season, humidifiers are an excellent method to alleviate the discomfort of a scratchy throat.
Conclusion: Best Shower Mold Cleaners That Are Non Toxic
There is often no need for alarm if you discover mold, but it can be a terrifying condition nonetheless. Preventing respiratory infections and allergies by eliminating mold growth in the shower is a top priority.
Most mildew and mold problems can be safely solved using one of the non-toxic mold cleaners described here.
Toxic cleansers may solve the problem of mold in your home but they will leave behind damaging effects to your health. Instead, a natural mold remover formula can swiftly and effectively eliminate the problem while leaving you and your environment healthy.
Mold thrives in dim conditions, so ensure your bathroom has bright lights. You can eliminate mold and safeguard your family’s health using one of the recommended non-toxic best shower mold cleaners listed in this article.